Understand the repair
What this service does
To achieve a factory-finish paint job, the windshield must be removed to allow paint to reach the inner edges of the frame. This process prevents unsightly paint lines and ensures no overspray touches the glass surface. Once the paint has cured, the original glass is cleaned and reinstalled with new seals.
Reference photographs — illustrative examples, not ARS project records. Photo source
What you may notice
Signs you need this service
- Planned full vehicle respray
- Rust spots visible around the glass seal
- Water leaking into the cabin during rain
What can cause the problem?
- Restoring a classic Bentley or Land Rover requires stripping the vehicle to its frame for paint.
- Corrosion often hides under rubber seals due to trapped moisture or coastal humidity.
- Poor previous installations may require a refit to stop whistling sounds at high speeds.
From inspection to finish
How the work is carried out
Inspect and identify
We carefully detach the exterior moldings and trim pieces surrounding the glass. The glass is then separated from the bond without breaking the existing panel.
- 01
Inspect and identify
We carefully detach the exterior moldings and trim pieces surrounding the glass. The glass is then separated from the bond without breaking the existing panel.
- 02
Repair the confirmed fault
The glass is stored safely while the body shop completes the sanding and painting process. We prep the newly painted frame by ensuring the surface is ready for bonding.
- 03
Check the result
The original glass is thoroughly cleaned and primed before being reset into the frame. We reattach all trim and test for a watertight seal across the entire perimeter.
The exact procedure depends on your vehicle and inspection findings. A technician confirms the work before repair.
Why it matters
Painting around the glass instead of removing it often leads to premature paint peeling and rust. Improper refitting can cause permanent leaks that damage the vehicle's interior electronics.
Before you drive
Always ensure the paint is fully cured before attempting to refit glass to the frame.
