Understand the repair
What this service does
Exterior detailing is a multi-step process designed to strip away oxidized paint layers and environmental fallout. We use a combination of chemical decontamination and mechanical polishing to restore the original luster of your clear coat. This process is essential for protecting your investment against the corrosive effects of salt air and sand.
Reference photographs — illustrative examples, not ARS project records. Photo source
What you may notice
Signs you need this service
- Dull or hazy paint finish
- Rough texture when touching paint
- Visible swirl marks under sunlight
What can cause the problem?
- Improper washing techniques at malls causing fine circular scratches.
- UV radiation breaking down the chemical bonds of the paint's clear coat.
- Mineral deposits from hard water drying quickly on hot body panels.
From inspection to finish
How the work is carried out
Inspect and identify
The vehicle undergoes a snow foam wash followed by a clay bar treatment to remove bonded grit. This creates a perfectly smooth surface for the polishing stage.
- 01
Inspect and identify
The vehicle undergoes a snow foam wash followed by a clay bar treatment to remove bonded grit. This creates a perfectly smooth surface for the polishing stage.
- 02
Repair the confirmed fault
We utilize dual-action polishers with specific pad and compound combinations to level the clear coat. This step removes oxidation and restores the depth of the paint color.
- 03
Check the result
A high-quality sealant is hand-applied to provide a sacrificial barrier against the elements. We then buff the surface to a high-gloss shine and check for uniformity.
The exact procedure depends on your vehicle and inspection findings. A technician confirms the work before repair.
Why it matters
Ignoring exterior contaminants can lead to clear coat failure and permanent paint oxidation. Once the clear coat peels, the only solution is a costly full vehicle respray.
Before you drive
Avoid washing your car in direct sunlight to prevent water spotting and chemical etching.
